Things to Consider Before You Install Your Electric Power Shower

For many different reasons, power showers are increasing in popularity. It may be a suitable choice for you, but before you do install an electric power shower, there are a few things of which you should be aware. The first consideration is the choice of a suitable type, and from whom you should buy it.

Another important and desirable feature, is the ease, in which your electric power shower can be installed. You will most likely prefer an installation with as little disruption as possible, and expert assistance is recommended. An electric power shower will provide the convenience of water at the desired temperature, at the needed pressure. There is the added convenience of a simple operation as some models can be operated with simple push-button controls.

Proper installation of a new shower requires the knowledge of both plumbing and electricity, and should be handled by professionals. You can get recommendations from friends and relatives or check on the reputations of some of the providers in your area.

There may be changes required in your plumbing and some electrical connection may be required. The electric power shower can use sources of both cold water and hot water cylinder, and is normally fed by cold water from the mains water supply. A minimum pressure of 10 lbs per square inch is required for proper functioning. Some models may also include temperature sensors and stabilizers.

There are advantages and disadvantages associated with the different models of showers available and some research may be needed to determine which model is most suitable.

Electric power showers are rated by the amount of power, that they can handle. When a previously installed shower is replaced by a model that is able to a larger amount of power, the electrical cable may also need to be replaced. The length and size of the electrical will also be determined how your shower is installed. In many instances isolation switches circuits and grounding circuits may be required. Your professional installers will also be fully aware of the required mandatory building codes and regulations.

Care must be exercised for safe installation and operation of the shower. If the precautions are taken, the risks of damage from any accidents are greatly reduced and the life of the shower can be extended. The manufacturers` instructions will usually provide recommendations on the safe installation and use of your electric power shower.

Electricity and water are not a safe combination as they have a strong affinity for each others. When the two care in close contact, extreme care must be exercised each, and there are some stringent procedures, that must be followed during the installation and maintenance of the electric showers. There should be no exposed wires, and all wires should be totally covered and properly insulated.

Showers that are rated with higher power ratings are usually able to heat more water, during the same period, and the result would be water delivered at a higher rate. The life of the shower can be extended with proper care and maintenance as the risks due to accidents is greatly reduced.